Reference Guide

1438 Menu reference
Process > Apply Effect > Extract Timing
Process > Apply Effect > Extract Timing
Use the Process > Apply Effect > Extract Timing command to extract the timing from selected
clips. The clip’s groove is extracted and vertical Pool lines are displayed to indicate the extracted
transients.
See also:
“To extract the groove from one clip and apply it to another clip” on page 626
Process > Apply Effect > Gain
The Process > Apply Effect > Gain command can adjust stereo channels independently, switch
channels, invert the phase of one or both channels, and produce any amount of possible gain or cut
values.
See “Using the Normalize and Gain commands” on page 790 for more information.
See also:
“Basic audio processing” on page 789
Process > Apply Effect > Normalize
The Process > Apply Effect > Normalize command lets you increase the volume of the selected
clips or tracks to the maximum level possible before clipping.
For more information, see “To normalize audio data” on page 790.
See also:
“Basic audio processing” on page 789
Process > Apply Effect > Remove DC Offset
The Process > Apply Effect > Remove DC Offset command lets you remove artifacts from audio
files caused by DC offset.
For more information, see “Removing DC offset” on page 794.