Reference Guide

1471
Insert MIDI Track
Menu reference
Insert MIDI Track
This command, which you find by right-clicking in the Console view in the grey area to the right of the
final module, adds a MIDI track to the console.
For more information about adding tracks, see “Changing track settings” on page 205.
Hide Module
This command allows you to hide track and bus modules in the Console view. You find the command
by right-clicking in the Console view in three different areas:
• For track modules, right-click in the grey area above a track’s Phase button.
• For buses, right-click in the grey area between the Send and Return knobs.
To redisplay modules, see “To choose the tracks that are displayed using the Track Manager” on
page 834, and “Configuring the Console and Track views” on page 833.
Set Snap-to = Current
This command, which you find by right-clicking a fader or knob in the Console or Track views, sets
the snap-to position of that fader or knob to its current value. When you double-click a fader or knob,
it jumps to its snap-to position.
For more information about the Console view, see “Preparing to mix” on page 831.
90 dB Range
This command, which you find by right-clicking any audio meter in the Track view or Console view,
changes the range that the meter measures to 90 dB.
For more information about meters, see “Metering” on page 849.
78 dB Range
This command, which you find by right-clicking any audio meter in the Track view or Console view,
changes the range that the meter measures to 78dB.
For more information about meters, see “Metering” on page 849.