Reference Guide

1482 Menu reference

Record Meter Options > Show Labels

This command toggles on/off the meter labels.

Record Meter Options > Hold Peaks

This command causes a meter to hold the most recent peak for a short time. The peak volume level

recorded by the meter is marked by a small white line which remains for a moment if lock peaks is

not checked or until the end of playback or recording if Lock Peaks is checked.

Record Meter Options > Lock Peaks

This command when checked and the Hold Peaks is also checked causes the peak to be locked at

its highest point on the meter until the end of playback or recording.

Playback Meter Options > Peak

Available in the Playback Meter Options, Record Meter Options, and Mains Meter Options

submenus, this command sets the meter to show peaks.

For more information about Peak meter display, see “Metering” on page 849.

Playback Meter Options > RMS

Available in the Playback Meter Options, Record Meter Options, and Mains Meter Options

submenus, this command sets the meter to RMS.

For more information about RMS meter display, see “Metering” on page 849.

Playback Meter Options > Peak + RMS

Available in the Playback Meter Options, Record Meter Options, and Mains Meter Options

submenus, this command sets the meter to Peak + RMS.

For more information about Peak + RMS meter display, see “Metering” on page 849.