Reference Guide

1483
Playback Meter Options > Show Labels
Menu reference
Playback Meter Options > Show Labels
This command toggles on/off the meter labels.
Playback Meter Options > Hold Peaks
This command causes a meter to hold the most recent peak for a short time. The peak volume level
recorded by the meter is marked by a small white line which remains for a moment if lock peaks is
not checked or until the end of playback or recording if Lock Peaks is checked.
Playback Meter Options > Lock Peaks
This command when checked and the Hold Peaks is also checked causes the peak to be locked at
its highest point on the meter until the end of playback or recording.
Output Bus Meter Options > Peak
Available in the Playback Meter Options, Record Meter Options, and Mains Meter Options
submenus, this command sets the meter to show peaks.
For more information about Peak meter display, see “Metering” on page 849.
Output Bus Meter Options > RMS
Available in the Playback Meter Options, Record Meter Options, and Mains Meter Options
submenus, this command sets the meter to RMS.
For more information about RMS meter display, see “Metering” on page 849.
Output Bus Meter Options > Peak + RMS
Available in the Playback Meter Options, Record Meter Options, and Mains Meter Options
submenus, this command sets the meter to Peak + RMS.
For more information about Peak + RMS meter display, see “Metering” on page 849.