Reference Guide

1484 Menu reference

Output Bus Meter Options > Show Labels

This command toggles on/off the meter labels.

Output Bus Meter Options > Hold Peaks

This command causes a meter to hold the most recent peak for a short time. The peak volume level

recorded by the meter is marked by a small white line which remains for a moment if lock peaks is

not checked or until the end of playback or recording if Lock Peaks is checked.

Output Bus Meter Options > Lock Peaks

This command when checked and the Hold Peaks is also checked causes the peak to be locked at

its highest point on the meter until the end of playback or recording.

Playback Meter Options > Pre Fader

This command sets the meter to measure the volume level in the signal path prior to entering the

fader.

Output Bus Meter Options > Pre Fader

This command sets the meter to measure the volume level in the signal path prior to entering the

fader.

Playback Meter Options > Post Fader

This command sets the meter to measure the volume level in the signal path after exiting the fader.

Output Bus Meter Options > Post Fader

This command sets the meter to measure the volume level in the signal path after exiting the fader.