Reference Guide

1485
Output Bus Meter Options > Pre Fader Post FX
Menu reference
Output Bus Meter Options > Pre Fader Post FX
This command sets the meter to measure the volume level in the signal path after the effects bin and
prior to the fader.
Percentage
This command sets the Audio Scaling ruler to display the percentage of the waveform being shown.
dB
This command sets the Audio Scaling ruler to display the dB level of the waveform being shown.
Zoom Factor
This command sets the Audio Scaling ruler to display the zoom factor (a multiple of the default zoom
level, i.e. a zoom factor of 10 shows the waveform at 10 times the detail) of the waveform being
shown.
Show and Fit Selection
This command zooms vertically and horizontally in the Track view to fit just the selected clips.
Show only Selected Tracks
Hides all tracks which are not selected.
Hide Selected Tracks
Hides all selected tracks.