Reference Guide

1503
[Track view] Options > Meter Options > Record Meter Options > Hold
[Track view] Options > Meter Options > Record
Meter Options > Hold Peaks
This command causes a meter to hold the most recent peak for a short time. The peak volume level
recorded by the meter is marked by a small white line which remains for a moment if lock peaks is
not checked or until the end of playback or recording if Lock Peaks is checked.
[Track view] Options > Meter Options > Record
Meter Options > Lock Peaks
This command when checked and the Hold Peaks is also checked causes the peak to be locked at
its highest point on the meter until the end of recording.
[Track view] Options > Meter Options > Track Meter
Options > Peak
This command sets the meter to Peak.
For more information about Peak meter display, see “Metering” on page 849.
[Track view] Options > Meter Options > Track Meter
Options > RMS
This command sets the meter to RMS.
For more information about RMS meter display, see “Metering” on page 849.
[Track view] Options > Meter Options > Track Meter
Options > Peak + RMS
This command sets the meter to Peak + RMS.
For more information about Peak + RMS meter display, see “Metering” on page 849.
[Track view] Options > Meter Options > Track Meter