Reference Guide

1505
[Track view] Options > Meter Options > Track Meter Options > -78 dB
[Track view] Options > Meter Options > Track Meter
Options > -78 dB
This command changes the range that track playback meters measure to 78 dB.
For more information about meters, see “Metering” on page 849.
[Track view] Options > Meter Options > Track Meter
Options > -90 dB
This command changes the range that track playback meters measure to 90 dB.
For more information about meters, see “Metering” on page 849.
[Track view] Options > Meter Options > Track Meter
Options > Show Labels
This command toggles on/off labels on track playback meters.
[Track view] Options > Meter Options > Track Meter
Options > Hold Peaks
This command causes a meter to hold the most recent peak for a short time. The peak volume level
recorded by the meter is marked by a small white line which remains for a moment if lock peaks is
not checked or until the end of playback or recording if Lock Peaks is checked.
[Track view] Options > Meter Options > Track Meter
Options > Lock Peaks
This command when checked and the Hold Peaks is also checked causes the peak to be locked at
its highest point on the meter until the end of playback.
[Track view] Options > Meter Options > Bus Meter