Reference Guide

1506
[Track view] Options > Meter Options > Bus Meter Options > RMS
Options > Peak
This command sets the meter to Peak.
For more information about Peak meter display, see “Metering” on page 849.
[Track view] Options > Meter Options > Bus Meter
Options > RMS
This command sets the meter to RMS.
For more information about RMS meter display, see “Metering” on page 849.
[Track view] Options > Meter Options > Bus Meter
Options > Peak + RMS
This command sets the meter to Peak + RMS.
For more information about Peak + RMS meter display, see “Metering” on page 849.
[Track view] Options > Meter Options > Bus Meter
Options > Pre Fader
This command sets the meter to measure the volume level in the signal path prior to entering the
fader.
[Track view] Options > Meter Options > Bus Meter
Options > Post Fader
This command sets the meter to measure the volume level in the signal path after exiting the fader.
[Track view] Options > Meter Options > Bus Meter
Options > Pre Fader Post FX
This command sets the meter to measure the volume level in the signal path after the effects bin and
prior to the fader.