Reference Guide

1508
[Track view] Options > Meter Options > Bus Meter Options > Show Labels
Options > -90 dB
This command changes the range that bus meters measure to 90 dB.
For more information about meters, see “Metering” on page 849.
[Track view] Options > Meter Options > Bus Meter
Options > Show Labels
This command toggles on/off labels on bus meters.
[Track view] Options > Meter Options > Bus Meter
Options > Hold Peaks
This command causes a meter to hold the most recent peak for a short time. The peak volume level
recorded by the meter is marked by a small white line which remains for a moment if lock peaks is
not checked or until the end of playback or recording if Lock Peaks is checked.
[Track view] Options > Meter Options > Bus Meter
Options > Lock Peaks
This command when checked and the Hold Peaks is also checked causes the peak to be locked at
its highest point on the meter until the end of playback or recording.
[Track view] Options > Drag and Drop Options
The Drag and Drop Options command opens the Drag and Drop Options dialog box.
[Track view] Options > Zoom Options
The Zoom Options command opens the Zoom Options dialog box.
This command shows options for changing the mouse’s zoom behavior. For more information about
Fast Zoom, see “To zoom using the mouse wheel (Fast Zoom)” on page 330.