Reference Guide

1537

Learn Knobs

The Learn Knobs command puts the FX Chain into a learning mode and will 'listen' to controls

touched on the plug-ins in the FX Chain. When you select Learn Knobs again, the touched controls

are assigned and displayed in the FX Chain property page. Learn mode is automatically ended if the

limit of 6 knobs is reached.

See:

“To add/remove an assignable knob or button (Producer only)” on page 890

“To map an assignable knob or button to a plug-in parameter (Producer only)” on page 892

Learn Buttons

The Learn Buttons command puts the FX Chain into a learning mode and will 'listen' to controls

touched on the plug-ins in the FX Chain. When you select Learn Buttons again, the touched

controls are assigned and displayed in the FX Chain property page. Learn mode is automatically

ended if the limit of 6 buttons is reached.

See:

“To add/remove an assignable knob or button (Producer only)” on page 890

“To map an assignable knob or button to a plug-in parameter (Producer only)” on page 892

Customize UI

The Customize UI command opens the Settings dialog box, which lets you configure the

appearance of the FX Chain property page.

See:

“Customizing the FX Chain UI (Producer and Studio only)” on page 893