Reference Guide

1570 Dialog box reference

Apply MIDI Effects dialog

When you select Process > Apply Effect > MIDI Effects, the Apply MIDI Effects dialog box

appears. This dialog box lets you select options for applying MIDI effects to selected MIDI data. You

can choose to delete the effect from the patch point after it is applied, so that it will not be reapplied

on playback.

See also:

“Applying MIDI effects” on page 913

Assign Series of Inputs dialog

The Selected Track Input Series command in the Track view Input control drop-down menu opens

the Assign Series of Inputs dialog box.

Use this command to assign a series of consecutive mono input ports to the selected audio tracks.

The First Input to Assign combo box lets you specify the audio input port that should be assigned

to the first selected track. If a left or right input is selected, then mono inputs will be assigned. If a

stereo input is selected, then stereo inputs will be assigned.

Figure 463. The Assign Series of Inputs dialog

See:

“To assign different audio input ports to multiple tracks” on page 218

Audio CD Burner dialog

The Utilities > Burn Audio CD command opens the Audio CD Burner dialog box. Use this

command to burn your tracks to an audio CD. Tracks must meet the following criteria:

• All audio tracks must be stereo Wave files (extension .wav).

• Sample rate must be 44,100 Hz.