Reference Guide

1575
Bank Name dialog
Dialog box reference
Data Rate
This field is greyed-out if you choose the Default Codec in the Video field. If you are compressing a
file to be played over the Internet, use a data rate that doesn’t exceed the capacity of the media
players you expect will be used to play your file.
Quality
Lower quality values provide faster transmission and vice versa.
Change AVI settings
Checking this box causes another dialog box to appear after you click the Save button. This is the
Properties dialog box that allows you finer control over the configuration of the AVI file you are
creating. The available parameters are Microsoft Direct Show settings.
Bank Name dialog
When you select a bank in the Sysx view and click the Name button, the Bank Name dialog box
appears. This dialog box lets you specify the name of the bank you selected. A bank must contain
some Sysx data before you can name it.
See also:
“Using the System Exclusive view” on page 1141
Bank Output dialog
When you select a bank in the Sysx view and click the Output button, the Bank Output dialog box
appears. This dialog box lets you specify which MIDI output you want the bank transmitted to. This is
useful when you have MIDI playback modules connected to several different ports of your MIDI
interface and you want to control which module receives a particular Sysx message.
See also:
“Using the System Exclusive view” on page 1141
Bank/Patch Change dialog
Select Insert > Bank/Patch Change to open the Bank Patch Change dialog box.
The output and channel of the selected track appear in the upper left corner.
Bank Select Method:
Choose from one of the following MIDI standard protocols:
• Normal