Reference Guide

1591
Delete dialog
Dialog box reference
Delete dialog
The Edit > Delete Special command opens the Delete dialog box, which allows you to remove
selected objects from the project. It doesn't put them on the Clipboard, so they can not be
subsequently pasted. You can specify the following objects to remove:
Events in Tracks
Removes all events in the selected clip(s).
Clip Automation
Removes any clip envelopes in the selected clip(s).
Track/Bus Automation
Removes any track or bus automation from the selected clip(s).
Tempo Changes
Removes all tempo changes in the selected clip(s).
Meter/Key Changes
Removes all meter and key changes in the selected clip(s).
Markers
Removes all markers in the selected clip(s).
You have the following options in the Delete dialog:
Delete Hole
If selected, the Delete Hole option removes the space in the track where the clip(s) had been. All
clips after the deleted clip(s) are moved forward in time by the length of the deleted clip(s). Checking
the Shift by Whole Measures option causes SONAR to move the following clips forward, but only
as far as the nearest whole measure.
For more information, see “To delete clips” on page 340.
Delete dialog (with multiple selection)
If you have both a track and an effect selected, the Delete dialog box appears with the following
options:
Current Selection
Check this box if you want to delete the current track or clip selection.