Reference Guide

1746
Remove DC Offset dialog
• High byte first. Checking this option tells SONAR that the significant data in the incoming sysx
message is in the form of two bytes, with the high byte first.
• Low byte first. Checking this option tells SONAR that the significant data in the incoming sysx
message is in the form of two bytes, with the low byte first.
• Starts with. Fill in the string that your device sends in sysx messages that precedes the
significant data.
• Ends with. Fill in the string that your device sends in sysx messages that follows the significant
data.
For step by step instructions:
“To set up remote control for a knob, button, or fader” on page 920
See also:
“Using control groups” on page 914
Remove DC Offset dialog
The Process > Apply Effect > Remove DC Offset command opens the Remove DC Options
dialog box, which allows you to remove audio artifacts cause by electrical mismatches between
recording hardware and input instruments or devices. This dialog box has the following fields:
• DC Offset Threshold (dB). You can set a minimum dB threshold. If the analyzed DC offset is
below this value, no removal takes place.
• Analyze Left Channel (dB) and Right Channel (dB). This field displays the DC offset
separately for the left and right channels. Press the Audition button to update the display.
• Compute DC Offset from first 5 seconds only. To speed processing, select the Compute DC
offset from first 5 seconds only check box. Only the first five seconds of a sound file will be
analyzed when measuring the DC offset. The only time that five seconds is not sufficient is if a
long fade-in or mute has been applied at the beginning of the file.
Remove Silence dialog
When you use the Process > Apply Effect > Remove Silence command, or click the Gate
Settings button in the Freeze Options dialog box, the Remove Silence dialog box appears. This
command creates absolute silence during silent passages, eliminating extraneous noise.
The Remove Silence dialog box has the following fields:
Note: If you set up remote control for a grouped control, the remote control works all controls in
the group.