Reference Guide

1751
Scale Defaults dialog
File name
Type or select the filename you want to open.
Save as type
A step sequencer pattern is always saved as a Step Sequencer Patterns file type, which has the
extension .ssp.
Scale Defaults dialog
In the Track Inspector, click the Scale control in the Snap to Scale section and choose Scale
Manager to open the Scale Manager dialog box, then click the Defaults button to open the Scale
Defaults dialog box.
This dialog box has the following fields:
• Restore Current Scale (if factory). This option restores a single, selected file to its factory
settings.
• Restore Any Missing Scales. If you have deleted a factory-supplied scale and want to replace
it with the original version, choose this option.
• Restore All Factory Scales. If you want to restore all factory-supplied scales to factory
settings, click this option.
Scale Manager dialog
In the Track Inspector, click the Scale control in the Snap to Scale section and choose Scale
Manager to open the Scale Manager dialog box, which lets you create and edit scales to use with
the Snap to Scale feature.
This dialog box has the following fields and controls:
• Scale Family. This field lists all of the families of scales that in which an individual scale might
be stored.
• Scale. This field lists the scales that are stored in the selected Scale Family.
• Keyboard display. This keyboard display shows the notes that are in the selected scale by
displaying a blue dot over each note in the selected scale. You can include or exclude a note
clicking keys in the keyboard display.
• Scale Degrees. This field lists the different scale degrees that are in the selected scale.
• Scale Degree buttons. These buttons below the Scale Degree field show what scale degrees
are in the selected scale. Each depressed button shows that the button’s namesake is in the
selected field.
• Defaults. This button opens a dialog box that offers to restore factory-supplied scales to their
default values.