Reference Guide
1781
Control Properties dialog
Control Properties dialog
The Control Properties dialog box appears when you right-click an assignable knob or button in an
FX Chain property page and select Edit control on the pop-up menu. This dialog box lets you
configure assignable knobs and buttons.
The Control Properties dialog box contains the following settings:
• Name. The name of the assignable control, shown as the label
• Position. The “slot” position of the control, from left to right.
• Destination. Choose up to four automatable plug-in parameters to control with the assignable
knob or button.
• Start. The start value for the destination parameter, specified as a percentage (0.00% to
100.00%).
• End. The end value for the destination parameter, specified as a percentage (0.00% to
100.00%). You can also set Start and End values automatically. For details, see “To set parameter
value range automatically” on page 891.
See:
“To customize an assignable control (Producer only)” on page 890
Settings dialog
The Settings dialog box appears when you right-click an FX Chain property page and select
Customize UI on the pop-up menu. This dialog box lets you change the colors and graphics that are
displayed in each FX Chain.
The Settings dialog box contains the following settings:
Custom GUI section
• Background image. The main background image in the FX Chain property page.
• Preset background image. The image behind the preset name.
• Fader cap image. Fader thumb for Input Level and Output Level faders.
• Button image. Assignable button images.
• Rotary image. Assignable knob images.
Colors section
• Preset text color. Color of preset name.
• Label text color. Color of button and knob text labels.
See:
“Customizing the FX Chain UI (Producer and Studio only)” on page 893