Reference Guide

1825
Step Sequencer view
View reference
To edit controller events on a single row
1. Click a row’s Select button.
The Controllers pane appears below the row. The Controllers pane contains a series of columns
that correspond to the steps in the selected row.
2. Click the Step Editor control and select a parameter name from the drop-down menu.
If the desired parameter is not listed, select New Value Type to open the MIDI Event Type
dialog box and specify the following options:
• Type. Choose the type of controller you want to add (for example, choose Control if you
want to edit volume).
• Value. This field is unavailable if you choose Wheel or ChanAft in the Type field. If you
choose Control, RPN, or NRPN in the Type field, choose which Control, RPN, or NRPN you
want to add. For example, to edit volume, choose 7-Volume in this field if you chose Control
in the Type field.
• Channel. Choose a MIDI channel for the controller event.
3. Do one of the following:
• To draw a single controller event. Click in the Controllers pane.
• To draw a series of controller events. Drag in the Controllers pane.
• To draw a straight line. Hold down the SHIFT key and drag in the Controllers pane.
• To erase controller events. Right-click an existing controller event.
A. Click a row’s Select button to show the Controllers pane below the row B. Select the controller type you want
to edit in the Controllers pane C. Draw events in the Controllers pane
Note: The Shared MIDI Channel indicator lights up if a selected row shares the same MIDI
channel as any other row. This is a convenient reminder that any controller events you edit in
the row will also affect all other rows that share the same MIDI channel.
C
B
A