Reference Guide

1865
Console view
View reference
Figure 529. The Read Automation and Write Automation buttons indicate if the entire channel strip is affected,
or only a subset of its controls.
To insert a plug-in effect
Do one of the following:
• Click the Insert FX button in the FX Bin module and choose a plug-in on the pop-up menu.
• Right-click the effects bin and choose a plug-in on the pop-up menu.
To show which channel strips are controlled by a control surface
1. Go to Edit > Preferences > MIDI - Control Surfaces.
2. Select your control surface in the Connected Controllers/Surfaces list.
3. Under WAI Display, select the Console View check box.
The Console view shows a color-coded bar at the bottom of any channel strips that are
controlled by your control surface. If you are using multiple control surfaces, you can assign a
custom color to each control surface. For details, see “The WAI display” on page 1232.
To show/hide a module
Click the Modules menu in the Console view and choose the desired module.
Figure 530. Console view Modules menu.
To show/hide individual channel strips
1. Click the Strips menu in the Console view and choose Track Manager to open the Track
Manager dialog box.
2. Select the channel strips you want to see, then click OK.
All controls Individual controls