Reference Guide

1886 View reference
Matrix view
• Trigger Resolution. By default, a cell follows the Global Trigger Resolution, as specified in
the Matrix view toolbar. You can also assign a custom trigger resolution to each cell, instead of
following the global trigger resolution. For details, see “To use a per-cell trigger resolution” on
page 1892.
Figure 543. Per-cell trigger resolution
A. Follow Global Trigger Resolution (no resolution is displayed) B. Per-cell Trigger Resolution (assigned
resolution is displayed)
You can right-click a cell to access the following commands:
• Import File. Use this command to import a file into a cell.
• Rename Cell. Use this command if you want to rename the cell.
• Clear Cell. Use this command to remove any pattern and MIDI assignment from the cell.
• One-Shot Trigger. Use this command to configure a cell as a one-shot sample. A one-shot cell
plays one repetition from beginning to end and ignores any loop and latch settings.
• MIDI Learn. Use this command to assign a MIDI event to a cell, which allows you to trigger the
cell via MIDI remote control. The MIDI Learn command shows an orange outline around the cell if
it is already in MIDI Learn mode, and shows a small MIDI icon if there is already a MIDI event
assigned to the cell. You can use the MIDI Learn command on both active and empty cells.
• Clear MIDI Learn. Use this command to remove any MIDI assignment from the cell. The cell
will no longer be triggered via MIDI remote control.
• Trigger Resolution. Assign the desired trigger resolution to the cell. A cell can either follow the
default Global Trigger Resolution setting, or a per-cell trigger resolution. The following settings
are available:
• Follow Global (default)
• Immediate
• Measure
• Beat
•1/4
•1/8
•1/16
•1/32
•1/64
A B
Follow Global Trigger Resolution Per-cell Trigger Resolution