Reference Guide

1890 View reference
Matrix view
To assign multiple patterns to subsequent columns
1. Select multiple patterns in the Media Browser view or the Clips pane.
2. Hold down the SHIFT key and drag the selected patterns to the desired target cell.
The first pattern is assigned to the target cell, and any additional patterns are assigned to
subsequent columns the right of the target cell.
To remove a pattern from a cell
•Do one of the following:
• Click the cell then press the DELETE key.
• Right-click the cell and select Clear Cell from the pop-up menu.
• Drag the pattern to a different cell.
To remove all patterns
• Click the arrow next to the Stop All Cells button in the Matrix view toolbar and select Clear
All Cells from the drop-down menu.
To specify how soon a pattern should start playing after being triggered
When you trigger a cell or column, playback starts after the amount of time that is selected in the
Cell Trigger Time menu in the Matrix view toolbar.
• Click the Trigger Resolution menu and select one of the available options:
• Immediate. Playback starts immediately.
• Next Measure. Playback starts on the next measure boundary.
• Next Beat. Playback starts on the next beat.
• Next 1/8. Playback starts on the next 8th note.
• Next 1/16. Playback starts on the next 16th note.
• Next 1/32 Note. Playback starts on the next 32th note.
• Next 1/64 Note. Playback starts on the next 64th note.
After a cell has been triggered, the cell blinks until the Trigger Resolution is reached, at which
time playback starts.
To start a pattern from its beginning
• Make sure the Cell Start toggle is in Always from Beginning mode before you trigger the
pattern.
Tip: To trigger a cell using the opposite mode of the current Cell Start setting, hold down the ALT
key when you trigger the cell.