Reference Guide

1892 View reference
Matrix view
During playback, the cell displays a “play” icon and a circular progress indicator to show the position
of the loop as it is playing. Patterns repeat themselves until you stop playback or until another
pattern in the same row starts to play (non-looped content play as one-shots, meaning the patterns
play only once).
See also:
“To use a per-cell trigger resolution” on page 1892
“To trigger a cell or column via MIDI remote control” on page 1894
To use a per-cell trigger resolution
By default, a cell follows the Global Trigger Resolution, as specified in the Matrix view toolbar. You
can also assign a custom trigger resolution to each cell, instead of following the global trigger
resolution.
To assign a per-cell trigger resolution:
1. Right-click the cell, point to Trigger Resolution on the pop-up menu, and select one of the
following options:
• Follow Global (default)
• Immediate
• Measure
• Beat
•1/4
•1/8
•1/16
•1/32
•1/64
Note 1: Only one cell per row can be triggered at a time. You can trigger multiple cells
simultaneously as long as they are located in different rows.
Note 2: Together, the Global Latch Mode and Global Loop Mode toggles give you flexible
control over how cells are triggered.
• To play a cell continuously when triggered. Enable Global Loop Mode; enable Global Latch
Mode
• To play a cell once through when triggered. Disable Global Loop Mode; enable Global Latch
Mode
• To play a cell continuously as long as the mouse/note is held. Enable Global Loop Mode;
Disable Global Latch Mode
• To play a cell as long as the mouse/note is held, but stop at end. Disable Global Loop Mode;
disable Global Latch Mode