Reference Guide

198 Controlling playback
Track-by-track playback
Silencing tracks
When a track is muted, SONAR processes the track while playback is in progress so that you can
unmute the track without stopping playback. If you have lots of muted tracks, this can place a heavy
load on your computer. Archived tracks, on the other hand, don’t place any load on your computer.
Therefore, if there are tracks you want to keep but don’t need to play, you should archive them
instead.When you mute or unmute a track while playback is in progress, there may be a slight delay
before you hear the effect of the change. This is to be expected and does not indicate a hardware or
software problem.
To mute or unmute individual tracks
• To mute or unmute a track, click its Mute button in the Track, Console view or Track Inspector.
• To mute or unmute several tracks at once, select the tracks and do one of the following:
• Right-click a track strip and choose MSR > Mute on the pop-up menu.
• To mute all selected tracks of the same track type, hold down the CTRL key and click any
selected track’s Mute button .
• To mute all tracks, hold down the CTRL key and click any non-selected track’s Mute button
.
To unmute all tracks
Click the Mute / Unmute All Tracks button in the Control Bar’s Mix module.
To mute all tracks
Do one of the following:
• Click the Mute / Unmute All Tracks button in the Control Bar’s Mix module.
• Hold down the CTRL key and click any track’s Mute button .
To archive or unarchive tracks
1. Select one or more tracks in the Track view.
2. Do one of the following:
• Click the track’s Archive button .
• Right-click a track strip and choose MSR > Archive on the pop-up menu.
Soloing tracks
Note: A track can not be archived during playback.