Reference Guide

208 Controlling playback
Changing track settings
For more information about audio track controls in the Track Inspector, see “Audio track controls” on
page 536.
For more information about audio track controls in the Console view, see “Audio track controls” on
page 1845.
Send Level (Track Inspector
and Console view only)
Controls volume of audio data sent by this send module.
Send Pan (Track Inspector
and Console view only)
Adjusts the send pan setting.
Send Pre/Post switch (Track
Inspector and Console view
only)
Pre (pre-fader) means that the Send signal goes to the bus prior to the track’s
volume fader; post means the Send signal goes to the bus after the volume
fader.
Send destination (Track
Inspector and Console view
only)
Displays name of bus that the Send is sending data to.
Mono/Stereo (Track
Inspector and Console view
only)
A switch that determines whether a track’s signal enters an effect or chain of
effects as mono or stereo, regardless of the nature of the track.
Phase In/Out (Track
Inspector and Console view
only)
A switch that inverts the phase of the track.
Effects bin The patch point for a track’s plug-ins or soft synths.
Meters The recording and playback levels are displayed in the Playback and Record
meters.
WAI display Shows a color-coded bar if the track is being controlled by a control surface.
Parameter What it means
Table 22.