Reference Guide

211
Changing track settings
Controlling playback
For more information about MIDI track controls in the Track Inspector, see “MIDI track and
Instrument track controls” on page 538.
For more information about MIDI track controls in the Console view, see “MIDI track controls” on
page 1846.
Velocity trim (Track Inspector
and Console view only)
The change in velocity (volume) that will be applied to notes in this track on
playback; ranges from –127 to +127
Input The input source for the track, used in recording
Output The output device through which the track is played
Ch (channel) (Track Inspector
and Console view only)
The MIDI channel through which the notes will be played
Bank (Track Inspector and
Console view only)
The set of patch names available for the track
Patch (Track Inspector and
Console view only)
The instrument sound that will be used for playback.
Time+ (Track Inspector only) An offset applied to the start time of the events in the track
Key+ (Track Inspector only) The number of steps by which the notes in the track are transposed on
playback (e.g., 12 to transpose up one octave)
Chorus (Track Inspector only) Adds MIDI chorus effect to the track
Reverb (Track Inspector only) Adds MIDI reverb effect to the track
Snap to Scale scale type
(Track Inspector only)
Displays current scale for Snap to Scale feature
Snap to Scale root note (Track
Inspector only)
Displays root note of current Snap to Scale scale
Snap to Scale on/off (Track
Inspector only)
Turns Snap to Scale feature on or off
WAI display Shows a color-coded bar if the track is being controlled by a control surface.
Parameter What it means
Table 23.