Reference Guide

221
Changing track settings
Controlling playback
To insert a bank/patch change
1. Highlight the track whose bank and patch you want to change by clicking on the track number.
2. Set the Now time to the time at which you want the change to occur.
3. Choose Insert > Bank/Patch Change to display the Bank/Patch Change dialog box.
4. Choose a bank and patch from the lists.
5. Click OK.
SONAR inserts a change in bank and patch. When you play back the project, the initial bank and
patch shown in the Track view will be used to the point at which the bank/patch change takes place.
You can remove a bank/patch change in the Event List view.
To choose patches with the Patch browser
1. Do one of the following:
• In the Track Inspector or Console view, right-click the patch name in the track module you
want to change patches in.
• In the Track Inspector, click the Patch Browser button in the track you want to change
patches in.
The Patch browser dialog box appears, displaying a list of all the Instrument patch names that
have been installed.
2. Search for a patch name, if desired, by filling in text in the Search field at the top of the dialog
box.
3. When you find the right patch, click its name and click OK.
SONAR changes the patch of the track you selected.
See:
“Patch Browser dialog” on page 1644