Reference Guide

402 Arranging and editing
Enhanced editing with keyboard
Navigating with a keyboard
Scroll and Zoom are part of the same mode, which makes it fast to navigate around a project.
You can zoom both horizontally and vertically, in small or large steps.
You can scroll fast or slow in any direction, in small or large steps.
To zoom and scroll with a keyboard
1. On your QWERTY keyboard, press the NumLock key to enable NumLock mode.
2. On the numeric keypad, press 0 to enable keyboard editing.
3. On the numeric keypad, press 1 to enable Zoom/Scroll mode.
The numeric keypad is mapped as follows:
Key Function CTRL+ ALT+ SHIFT+
0 Enable/disable keyboard
editing (when NumLock is
enabled)
-- -- --
1 Enable Zoom/Scroll mode -- -- --
2 Scroll down in large steps Zoom out
vertically in large
steps (based on
selection)
-- --
3 Enable Select mode -- -- --
4 Scroll left in large steps Zoom in
horizontally in
large steps (based
on selection)
-- --
5 Center edit cursor -- -- --
6 Scroll right in large steps Zoom out
horizontally in
large steps (based
on selection)
-- --
8 Scroll up in large steps Zoom in vertically
in large steps
(based on
selection)
-- --
Table 63.