Reference Guide

403
Enhanced editing with keyboard
Arranging and editing
The zooming behavior depends on the current Edit or Select mode:
• Zoom around the selection. Will center and zoom on the mid-point of the selection.
• Zoom around the edit cursor. Will center and zoom around the cursor.
The most appropriate zoom method is used automatically based on the following logic:
• The default zoom method is Zoom around the selection.
• If there is no selection, the next zoom method is Zoom around the edit cursor.
Selecting with a keyboard
In Select mode, you can select either clips or time.
To enable selecting with a keyboard
1. On your QWERTY keyboard, press the NumLock key to enable NumLock mode.
2. On the numeric keypad, press 0 to enable keyboard editing.
3. On the numeric keypad, press 3 to enable Select mode.
The numeric keypad is mapped as follows:
9 Enable Edit mode -- -- --
Volume knob (if
keyboard has a rotary
encoder)
Scroll horizontally Scroll vertically Scroll in small
steps
Zoom (based on
selection)
Key Function CTRL+ ALT+
2 Move edit cursor down Move to closest clip on next
track
Select down
4 Move edit cursor left Move to previous clip Select left
5 Center edit cursor -- --
6 Move edit cursor right Move to next clip Select right
8 Move edit cursor up Move to closest clip on
previous track
Select up
Table 64.
Key Function CTRL+ ALT+ SHIFT+
Table 63.