Reference Guide

405
Enhanced editing with keyboard
Arranging and editing
To enable clip editing with a keyboard
1. On your QWERTY keyboard, press the NumLock key to enable NumLock mode.
2. On the numeric keypad, press 0 to enable keyboard editing.
3. On the numeric keypad, press 9 to enable Edit mode.
The numeric keypad is mapped as follows:
To fade clips with a keyboard
1. In Select mode, select the clips that you want to fade.
2. Press 9 to enable Edit mode.
3. Specify the clip property that you want to edit:
• Fade in. Press 8.
• Fade out. Press 2.
4. Do one of the following to adjust the selected fade:
• Turn the rotary encoder.
• Press PLUS (+) or MINUS (-).
Function Key
Select fade out for editing 2
Select left clip edge for cropping 4
Select right clip edge for cropping 6
Select fade in for editing 8
Fade or crop selected clips Volume knob (if keyboard has a rotary encoder)
Crop or fade right in Edit mode PLUS (+)
Crop or fade left in Edit mode MINUS (-)
Table 65.
Note: Fades do not obey Snap to Grid.