Reference Guide

Inspectors
When working on a project, you will frequently need to access track and clip parameters and mix
controls. The Track Inspector and Properties Inspector provide easy access to relevant settings for
the selected track(s) or clip(s).
Figure 167. Use the Track Inspector and Properties Inspector to configure track and clip settings.
A. Properties Inspector B. Track Inspector
The Inspector pane appears to the left of the Track view, but can also be moved to the right side.
There are three separate inspectors:
• Track Inspector. The Track Inspector shows mix settings for the current track, bus, or main,
and is essentially identical to a channel strip in the Console view. Advanced MIDI settings are also
available for MIDI tracks and Instrument tracks. For details, see “Track Inspector overview” on
page 529.
• Properties Inspector. The Properties Inspector shows properties for the selected clip(s),
track(s), or bus(es). For details, see “Properties Inspector overview” on page 544. The Properties
Inspector has several modes:
A
B