Reference Guide

524 Inspectors
• Clip. The Clip Properties Inspector displays settings for the currently selected clip(s). For
details, see “Properties Inspector - Clip Properties” on page 546.
• Track. The Track Properties Inspector lets you type a track name, specify the automation
write mode and time base, specify an audio track’s AudioSnap render modes, specify the
default clip colors, and enter a text description. For details, see “Properties Inspector - Track
Properties” on page 553.
• Bus. The Bus Properties Inspector lets you type a bus name, specify the automation write
mode and time base, and enter a text description. For details, see “Properties Inspector - Bus
Properties” on page 556.
• ProChannel (Producer only). ProChannel combines compression, equalization, and tube
saturation modeling in one convenient processor. ProChannel is available on each audio track,
Instrument track and bus. For details, see “ProChannel (Producer only)” on page 963.
Note: Settings in the inspectors are non-destructive, and therefore do not destructively process
data in any way. Feel free to experiment with different settings without worrying that changes
are permanent.
Note: Due to technical limitations of the VST plug-in format, it is not possible to show more than
one instance of a ProChannel module. As a result, the same ProChannel instance can not be
displayed in the Inspector and Console view at the same time. If you open ProChannel in the
Inspector, the same ProChannel will close in the Console view, and vice versa.