Reference Guide

529
Track Inspector overview
Inspectors
Track Inspector overview
The Track Inspector provides mixing controls for the currently selected audio track, MIDI track,
Instrument track, bus or main. The Track Inspector is essentially identical to a channel strip in the
Console view. Any changes you make in the Track Inspector are reflected in the corresponding
Console view channel strip, and vice versa. The Track Inspector modules can be shown/hidden
independently from the corresponding Console view modules.
The Track Inspector is divided in two. The left strip shows mix controls for the current track/bus/
main. The right strip varies depending on the current track type, as shown in the following table.
Showing both the current track and its output destination side-by-side makes it fast and easy to
configure the desired audio routing.
Current track type Left strip Right strip
Audio Selected audio track Output of selected track or send
MIDI Selected MIDI track Arpeggiator, Input Quantize, Snap to Scale settings,
MIDI chorus, MIDI reverb, Bank Select Method,
Key+ and Time+ for selected MIDI track
Instrument Selected Instrument track Audio tab: Output of selected track or send
MIDI tab: Arpeggiator, Input Quantize and Snap to
Scale settings for selected Instrument track
Bus Selected bus Output of selected bus or send
Main Selected main Blank
Table 111. Track inspector controls