Reference Guide

533
Track Inspector overview
Inspectors
Patch The instrument sound that will be used for
playback.
xx
Phase Invert A switch that inverts the phase of the track. x
Mono/Stereo A switch that determines whether a track’s
signal enters an effect or chain of effects as
mono or stereo, regardless of the nature of
the track.
xx
Read
Automation
Enable/disable automation playback. x x x x
Write
Automation
Enable/disable automation writing. x x x x
Mute When enabled, mutes the track. x x x x x
Solo When enabled, solos the track. x x x x
Arm for
recording
When enabled, arms the track for audio
recording.
x x x
Input echo Turns input monitoring on or off. x x x
Waveform
Preview
Display the waveform of the audio that’s
flowing through the bus.
x
Pan The stereo distribution of the output,
ranging from 100% left (hard left) to 100%
right (hard right); a value of “C” indicates
sound that is centered left-to-right. On
stereo tracks, pan acts as balance.
xxx x
Volume The current volume level for the track,
ranging from -INF (silent) to +6 dB
(maximum volume). The recording and
playback levels are displayed in the
Playback and Record meters.
x x x x x
Meter The recording and playback levels are
displayed in the Playback and Record
meters. For MIDI tracks, the meter shows
MIDI activity and velocity.
xxx xx
Track icon Track icons allow you to quickly identify a
track’s contents by instrument. You can
assign a new track icon, create your own
track icons, and save an icon as part of a
track template.
x x x x x
Track number A sequential track number used for
reference.
xxx x
Control Description
Audio
track
MIDI
track
Instrument
track
Bus Main
Table 112. Track Inspector controls (Continued)