Reference Guide
547
Properties Inspector overview
Inspectors
To show/hide the Clip Properties Inspector
Click the Clip button at the top of the Inspector pane, or press SHIFT+I.
Figure 180. Click the Clip button to show/hide the Clip Properties Inspector.
To show/hide a section in the Clip Properties Inspector
Click the section’s header bar in the inspector.
The section expands and the previously-displayed section collapses.
Figure 181. Click a section’s header bar to expand the section and show its controls.
Properties section
• Properties header bar. Click to show/hide the Properties section.
• Clip Name. Use this field to assign a name to the selected clip. The name of a clip is used in the
Track view and Event List view. You can assign any name to help you remember the contents of
the clip.
• Time Format. Use the list to specify in which format to display the selected clip’s Start time and
Length. The options are as follows:
• MBT. Display the clip’s Start and Length properties in M:B:T (Measure: Beat:Tick) format.
• Samples. Display the clip’s Start and Length properties in number of samples format.
• HMSF. Display the clip’s Start and Length properties in H:M:S:F (Hour:
Minute:Second:Frame) format.
• Seconds. Display the clip’s Start and Length properties in number of seconds format.
• Start. Use this field to move the selected clip forward or backward in the track by setting a new
start time.
• Length. This field displays the length of the selected clip.