Reference Guide

601
Editing transient markers
AudioSnap (Producer and Studio only)
To reset transient markers
1. Select all transient markers you want to reset.
2. Right-click any selected transient marker and select Reset from the pop-up menu.
To disable a transient marker
• Right-click the marker you want to disable and select Disable from the pop-up menu.
To delete a transient marker
• Right-click the marker you want to reset and select Delete Marker from the pop-up menu.
To insert a new transient marker
1. Select the Smart tool in the Control Bar.
2. Assign the track’s Edit Filter control to Audio Transients.
3. Hold down the ALT key and click where you would like to insert a new transient marker.
A new transient marker is inserted.
or
1. Disable the Snap to Grid button (or press the N key) if the place you need the marker is not
on a convenient snap location.
2. Select the clip or clips that need the marker.
3. Move the Now Time to the place where you want the marker.
4. Press CTRL+ALT+I.
The marker appears in the selected clip(s) and displays a hollow square to show that it is a manually
created marker:
Note: You can only delete user-created transient markers.
Note: You can also add markers at Pool lines with a single command. See “To add markers at
Pool lines” on page 638.