Reference Guide

708 Editing MIDI events and continuous controllers (CC)

The Inline Piano Roll view

Drawing and editing notes and controllers in the Inline Piano Roll view is the same in the Piano Roll

view, with a few minor exceptions (noted in the appropriate topics). To draw and edit notes and

controllers in the Inline Piano Roll view, see “Selecting notes” on page 684, “Editing notes with the

global tools” on page 686, “Adding controllers” on page 699, and “Selecting controllers” on page

701.

You can zoom in to or out of individual MIDI Tracks by dragging the MIDI Scale up or down. See

“The MIDI scale” on page 706 for more information.

To edit controller events in the Inline Piano Roll view

1. Click the MIDI track’s Edit Filter control, point to Notes and choose New Value Type to open the

MIDI Event Type dialog box.

2. Choose options from the following fields:

• Type. Choose the type of controller you want to add (for example, choose Control if you

want to edit volume).

• Value. This field is greyed-out if you choose Wheel or ChanAft in the Type field. If you

choose Control, RPN, or NRPN in the Type field, choose which Control, RPN, or NRPN you

want to add. For example, to edit volume, choose 7-Volume in this field if you chose Control

in the Type field.

• Channel. Choose a MIDI channel for the controller if you want. If your track has a MIDI

channel listed in the Ch field, all MIDI data in your track uses the listed MIDI channel.