Reference Guide

743
The Event List view
Editing MIDI events and continuous controllers (CC)
See:
“Event List buttons and overview” on page 743
“Event List display filter” on page 745
“Editing events and event parameters” on page 746
“Additional event information” on page 747
Event List buttons and overview
Each line of the Event List view shows a single event along with all of its parameters. There are
many different types of events. All share the following parameters:
• The time of the event, displayed in SMPTE (hours:minutes:seconds:frames) format
• The time of the event, displayed in MBT (measures:beats:ticks) format
• The event type, or kind of event
The remaining parameters vary by event type. You can hide or show each kind of event via the
Event List view View menu or by checking its check box in the Event Manager dialog box. Here is a
summary listing of the parameters that apply to each type of event.
Short name Type of event Parameters
Note MIDI note Pitch (MIDI key number), velocity (0-127), duration
(beats:ticks or simply ticks), MIDI channel (1-16)
KeyAft MIDI key aftertouch Pitch (MIDI key number), pressure amount (0-127), MIDI
channel (1-16)
Control MIDI controller change Controller number (0-127), controller value (0-127), MIDI
channel (1-16)
Patch MIDI patch change Bank select method, bank number, number or name of the
patch, MIDI channel (1-16)
ChanAft MIDI channel aftertouch Pressure amount (0-127), MIDI channel (1-16)
Wheel MIDI pitch wheel position Wheel position (-8192 to 8191, where the center is 0)
RPN Registered Parameter
Number
Parameter number (0-16383), parameter value (0-16383),
MIDI channel (1-16)
NRPN Non-registered Parameter
Number
Parameter number (0-16383), parameter value (0-16383),
MIDI channel (1-16)
Sysx Bank System Exclusive data
bank
Sysx bank number (0-8191)
Sysx Data System Exclusive data
message
Sysx message up to 255 bytes long
Table 136.