Reference Guide

791
Basic audio processing
Editing audio
5. If you want to invert the left channel phase, click the Invert left-channel phase button . If you
want to invert the right-channel phase, click the Invert right-channel phase button in the New
Right Channel section.
6. If you want to remove center material (usually where the vocal track is), set the New Left
Channel-From Left slider and the New Right Channel-From Right slider to 100%, and set the
New Left Channel-From Right slider and the New Right Channel-From Left slider to -100%
(negative 100%).
7. Press the Audition button if you want to audition your edits.
8. Click OK to process the selected audio.
Listen to the edited data in your mix. You can use the Edit > Undo command if you don’t like the
results, and then try different settings in the Gain dialog box.
Reversing audio data
By reversing audio data, you can make it play backwards. You may want to do this to obtain unusual
sounds for special effects.
The Reverse command does not reverse the musical position of audio data. Use the Process >
Retrograde command to invert the order of clips in time.
To reverse audio data
1. Select the audio data to be affected.
2. Choose Process > Apply Effect > Reverse from the menu.
SONAR reverses the selected audio data.