Reference Guide

796 Editing audio
Advanced audio processing
To crossfade two overlapping clips
1. Select two overlapping audio clips. They need not be on the same track, but they must overlap in
time for the command to have any effect.
2. Choose Process > Apply Effect > Crossfade to open the Crossfade dialog box.
3. Select an envelope from the drop-down list.
Figure 246. The Crossfade dialog
4. If desired, manipulate the curve as described in the table above. You can manipulate only the
curve pertaining to the first of the two overlapping clips; the second curve is automatically
adjusted so that the two curves constantly add up to 100%.
5. Click OK.
SONAR applies the two fades to the selected data.
See “Slip-editing (non-destructive editing)” on page 392 for information on non-destructive editing.