Reference Guide

834 Mixing
Preparing to mix
To choose the tracks that are displayed using the Track Manager
1. Click the Track view Tracks menu and choose Track Manager to open the Track Manager
dialog box.
2. In the list, check those tracks you would like displayed in the view in which you are working, and
uncheck the rest. You can use SHIFT-click, CTRL-click, or the quick select buttons to select
multiple modules; press the SPACEBAR to check or uncheck all the selected modules at once.
Please note that the track display selections you make in the Track view do not affect those in
the Console view and vice versa.
3. Click OK.
To hide a bus or track
• Right-click on the module and choose Hide Track or Hide Bus.
To show or hide meters in the Track view
• Click the Track view Options menu, point to Meter Options and select one of the following
options:
• Track Record Meters. Displays record meters for any armed track.
• Track Playback Meters. Displays playback meters.
• Bus Meters. Displays meters in buses.
For more information about metering options, see “Changing the meters’ display” on page 851.
To change a meter’s range
• Right-click on the meter and choose a new range.
To add a bus
1. Right-click in the Bus pane (to add a bus at the end of the current buses) or over an existing bus
(to add a bus before it).
2. Select Insert Stereo Bus or Insert Surround Bus from the menu that appears.
A bus appears in the Bus pane.
To delete a bus
1. Right-click in the Bus pane over an existing bus.
2. Select Delete Bus from the menu that appears.
The bus is deleted from the Bus pane.
Note: If you have any track or bus routed through the bus you delete, the signal will be rerouted
to the deleted bus’s output.