Reference Guide

835
Preparing to mix
Mixing
To create a bus send in a track
1. Right-click in an empty part of the Track pane (Track view) or a track module (Console view).
2. Select Insert Send for a list of buses available.
3. Select a bus from the list.
To set the snap-to position of a knob or fader
1. Set the control to the desired position.
2. Right-click on the control and choose Value > Set Snap-To=Current.
From now on, the control returns to this position when double-clicked.
To insert a new track
1. Right-click in the Console view or on the header of a track in the Track view.
2. Choose Insert Audio Track or Insert MIDI Track.
SONAR adds a new track to the project.
To rename a track or bus
1. In the Console view, click on the module name. In the Track view double-click on the Track
name.
2. Type a new name.
3. Press ENTER.
If you rename a track, the new name is copied to the Track view. If no name has been assigned to a
track, the Console view and Track view display the track’s number.
To link left/right faders in a Console view module
1. In the module whose faders you want to link, adjust the volume of each fader to the appropriate
level.
2. Click the Link button .