Reference Guide

841

Signa l flow

Mixing

Sidechaining signal flow

See also:

“Sidechaining” on page 872

“Signa l flow” on page 839

“External Insert signal flow” on page 878

Routing and mixing digital audio

Any audio track can be tapped, before or after the track volume control, and sent to one or more

buses. A bus can tap any number of audio tracks. Each track’s data passes through the track’s send

level knob on its way to the bus. This is shown in the following figure.

A. Pre-fader: output level to Bus 1 is not affected by the track’s volume fader B. This track is routed to Bus 1 and

Bus 2 C. Send enable button: must be lit to send track data to bus D. Post-fader: track’s volume fader controls

output level to Bus 2

Track 1

Output

Track 1 effects bin

Track 2

Output / Send

Bus

Output / Send

Sidechainable FX

Hardware

Output

Sum

Sidechain input

Bus