Reference Guide

845
Signa l flow
Mixing
Select tracks/buses that are assigned to a specific bus
You can quickly select all tracks and buses that are routed to a specific bus (via outputs or sends).
To do so, hold down the ALT key and click the bus’ Select control in the Track view or Console view.
To display the audio waveform of a bus
• Enable the bus’ Waveform Preview button . This displays the waveform of the audio that is
flowing through the bus.
Main outs
Each enabled hardware channel has a main out channel strip in the Console view. Main outs are the
final destination for all of your audio in SONAR. Main outs accept input from both tracks and buses.
Main outs contain both a left channel and a right channel Volume fader, which allows you to adjust
the level of each channel independently. You can link the two faders to move them as a group.
Figure 254. Track Inspector controls for mains
A. Mute B. Link channels C. Volume D. Meter E. Icon
A
C
E
B
D