Reference Guide

848 Mixing
Insert Send Assistant
To insert a send to a new stereo bus
1. Right-click on a track or bus and select Insert Send > Insert Send Assistant from the pop-up
menu.
The Insert Send Assistant dialog box opens.
2. Under New Bus Options, select Stereo and specify any other desired options (see “New bus
options” on page 847).
3. Click OK to close the Insert Send Assistant dialog box.
A new send is inserted and assigned to the new bus.
To insert a send to a new surround bus
1. Right-click on a track or bus and select Insert Send > Insert Send Assistant from the pop-up
menu.
The Insert Send Assistant dialog box opens.
2. Under New Bus Options, select Surround and specify any other desired options (see “New bus
options” on page 847).
3. Click OK to close the Insert Send Assistant dialog box.
A new send is inserted and assigned to the new surround bus.
To insert a send to a new effect bus
1. Right-click on a track or bus and select Insert Send > Insert Send Assistant from the pop-up
menu.
The Insert Send Assistant dialog box opens.
2. Under New Bus Options, select Stereo or Surround.
3. Click Choose Effect and choose the desired effect plug-in.
The chosen effect plug-in name is display on the button face.
4. Make sure Pre Fader is not selected.
5. [Optional] If you want to see the effects UI, select the Show Effects Property Page check box.
6. Specify the desired output in the Bus Output list.
7. Click OK to close the Insert Send Assistant dialog box.
A new send is inserted and assigned to the new bus. The new bus contains the chosen effect
plug-in.