Reference Guide
853
Metering
Mixing
Enabling mono on a bus/main will affect upstream meters
If you make a bus or main out mono by toggling its Mono/Stereo switch, any “upstream” meters—
that is, meters on any tracks or buses that are assigned to the mono bus/main out—from the bus/
main out will also display as mono.
See also:
“What the meters measure” on page 850
“Hiding and showing meters” on page 850
“Segmented and non-segmented meters” on page 853
To show vertical or horizontal meters in the Track view
• Click the Track view Options menu, point to Meter Options and select Horizontal Meters or
Vertical Meters.
To customize meter colors
1. Go to Edit > Preferences > Customization - Colors.
2. In the Color Category list, select Meters.
3. Choose VU LO Level, VU HI Level, or VU Tick Marks, and select the desired color.
Segmented and non-segmented meters
You can display meters as segmented (the default) or non-segmented meters.
A. Segmented meter B. Non-segmented meter
Note: This only affects the meter display, not any audio that is bounced or exported.
Note: Custom meter colors are only available when using non-segmented meters.
A
B