Reference Guide

892 Mixing
Effects chains
When you double-click the knob or button, it returns to its default value.
To map an assignable knob or button to a plug-in parameter (Producer
only)
1. Right-click an assignable knob or button in the FX Chain property page and choose Edit control
on the pop-up menu to open the Control Properties dialog box.
2. Specify an automatable plug-in parameter in the Destination list. You can specify up to four
parameters for each knob and button.
Figure 269. Specify up to four automatable plug-in parameters for each assignable control.
See:
“Effects chains” on page 882
“Using FX Chain presets” on page 884
“Customizing the FX Chain UI (Producer and Studio only)” on page 893
“Audio effects (audio plug-ins)” on page 797
Note: If multiple parameters are assigned to the knob or button, the default value will be 0.5.
Note: You can also “learn” plug-in parameters by simply touching controls in plug-in property
pages. To do so, right-click in the FX Chain property page and select Learn Knobs or Learn
Buttons on the pop-up menu. Touch the plug-in parameters you want to assign, then select
Learn Knobs or Learn Buttons again to exit learn mode.