Reference Guide

916 Mixing
Using control groups
Figure 275. The Group Manager dialog
2. Choose Absolute or Relative as the group type and click OK.
SONAR uses the type to determine the range of motion for the group’s controls.
To create a custom group
1. Right-click on any control in the group and choose Group Manager to display the Group
Manager dialog box.
2. Choose Custom as the group type. The starting and ending values for each control are
displayed.
3. To change the starting or ending value for a control, click on the control in the list and enter new
values in the Start and End box.
4. To swap the starting and ending value, click the Swap button.
5. Click Close when you are done.
SONAR uses the type to determine the range of motion for the group’s controls.
To adjust the Start Value of a control
1. Set the control to the desired starting value.
2. Right-click on the control.
3. Choose Value > Set Start = Current.
SONAR sets the start value of the control.
The Set Start = Current and Set End = Current commands set the range of motion that a grouped
control moves through as the other members of the group move through their starting and ending
values. You don’t have to designate a group as a custom group to create a custom group—just
group some controls and set their starting and ending values.
To adjust the End Value of a control
1. Set the control to the desired ending value.
2. Right click on the control.