Reference Guide

981
ProChannel (Producer only)
• Dry/Wet. Adjusts the balance between the unprocessed (dry) and processed (wet) audio
signal. The range is 0 to 100% and the default value is 100%.
See also:
“To sidechain the ProChannel compressor” on page 969
See:
“ProChannel (Producer only)” on page 963
“Using ProChannel” on page 966
“ProChannel modules and controls” on page 971
“PC76 U-Type Channel Compressor module” on page 977
“QuadCurve Equalizer module” on page 981
“Tube Saturation module” on page 987
“Console Emulator module” on page 988
“FX Chain module” on page 992
QuadCurve Equalizer module
The QuadCurve Equalizer module allows you to fine tune the frequency spectrum of your tracks.
The QuadCurve Equalizer module can be displayed in either full size or compact size. The compact
module hides the Frequency, Q and Level controls for the Low, Low-Mid, Mid-High and High bands.
You may want to show the compact size if ProChannel is too tall to show all its controls in the
Inspector or Console view.
• To show/hide compact mode in the Inspector. Click the Display button at the bottom of the
Inspector, point to Module Options > ProChannel and choose Compact EQ Module.
• To show/hide compact mode in the Console view. Click the Console view Options menu,
point to ProChannel and choose Compact EQ Module.
To adjust knobs with finer resolution, hold down the SHIFT key while adjusting a knob.
To type parameter values, double-click the value edit box below a parameter.