Reference Guide
986 ProChannel (Producer only)
the Low band boosts or attenuates a range of frequencies around a central point in a bell shape.
In Low Shelf mode, the Low band boosts or attenuates the set frequency and all frequencies
below it.
• High band filter type. Toggles the High band between Bell and High Shelf mode. In Bell mode,
the High band boosts or attenuates a range of frequencies around a central point in a bell shape.
In High Shelf mode, the High band boosts or attenuates the set frequency and all frequencies
above it.
• Low Pass filter enable/disable . Enables the Low Pass filter, which attenuates high
frequencies above the Low Pass frequency while allowing other frequencies to pass unfiltered.
• Slope (Low Pass). Specifies the ratio of how the Low Pass filter attenuates frequencies above
the Low Pass frequency. Slop is expressed in decibels per octave. The range is from 6 dB to 48
dB in 6 dB increments.
• LP. Specifies the cut-off frequency for the Low Pass filter.
• High Pass filter enable/disable . Enables the High Pass filter, which attenuates low
frequencies below the High Pass frequency while allowing other frequencies to pass unfiltered.
• Slope (High Pass). Specifies the ratio of how the High Pass filter attenuates frequencies below
the High Pass frequency. Slop is expressed in decibels per octave. The range is from 6 dB to 48
dB in 6 dB increments.
• HP. Specifies the cut-off frequency for the High Pass filter.
• Gloss . Adds a smooth breath and presence to the high end without any harshness using
a unique gloss filter.
See also:
“To interact with the QuadCurve Equalizer graph” on page 968
See:
“ProChannel (Producer only)” on page 963
“Using ProChannel” on page 966
“ProChannel modules and controls” on page 971
“PC76 U-Type Channel Compressor module” on page 977
“PC4K S-Type Bus Compressor module” on page 979
“Tube Saturation module” on page 987
“Console Emulator module” on page 988
“FX Chain module” on page 992