Reference Guide

997
ProChannel (Producer only)
To set the default parameter value
1. Adjust a knob or button in the FX Chain module to the desired default position.
2. Right-click the knob or button and choose Set Default Value on the pop-up menu.
When you double-click the knob or button, it returns to its default value.
To map an assignable knob or button to a plug-in parameter
1. Right-click an assignable knob or button in the FX Chain module’s Controls page and choose
Edit control on the pop-up menu to open the Control Properties dialog box.
2. Specify an automatable plug-in parameter in the Destination list. You can specify up to four
parameters for each knob and button.
Figure 304. Specify up to four automatable plug-in parameters for each assignable control.
Note: If multiple parameters are assigned to the knob or button, the default value will be 0.5.
Note: You can also “learn” plug-in parameters by simply touching controls in plug-in property
pages. To do so, right-click in the FX Chain module’s Controls page and select Learn Knobs or
Learn Buttons on the pop-up menu. Touch the plug-in parameters you want to assign, then
select Learn Knobs or Learn Buttons again to exit learn mode.